Flexo® Silver Plated
Perfect For High End Automotive Applications
Flexo® Silver Plated Copper Braid is made to conform to AA59569 and ASTM-B298. MBS products are produced with a minimum plating thickness of 40 micro-inches. Federal Specification QQ-B-575C, dated September 22, 1993 was replaced on November 20, 2000 by Commercial Item Description (CID) A-A-59569. This CID covers tin- or silver-plated copper wire braids supplied in tubular or flat form intended for use as shielding over electrical conductors, controller contacts and grounding bonds. USE: Silver plating, in lieu of tin plating, is necessary when the shielding is to be subjected to temperatures exceeding 150°C or if special corrosion resistance is required.
- Melt Temp: 449°F/232°C
- 0.005"-0.010" Wire Thickness
- EMI, RFI, ESD Protection
- Cut And Abrasion Resistant
- Expands for Easy Installation
- Complies With CID A-A-59569
What Are The Benefits of Metal Sleeving Products?
EMI/RFI Shielding: Metal braided sleeving provides excellent electromagnetic interference (EMI) and radio frequency interference (RFI) shielding. The metal braids in the sleeve create a conductive shield that blocks out interference and prevents signal loss.
Durability: Metal braided sleeving is extremely durable and can withstand high temperatures, abrasion, and chemicals. This makes it an ideal choice for use in harsh environments or in applications where the sleeving may be subjected to high stress or wear and tear.
Beauty & Aesthetics: Metal braided sleeving can be an attractive choice for use in applications where appearance is important. The sleeving can be made from a variety of metals, including stainless steel, copper, and brass which can add a unique finish to your project
Easy Installation: Metal braided sleeving is easy to install and can be cut to length using shears. It can also be secured in place using a variety of methods, including heat shrink tubing, cable ties, clamps, or adhesive tapes.
We believe sleeving is the best of all worlds when it's time to deal with harnesses, snakes and bundles, and we want to convince you that some type of sleeving will be the perfect balance of economy, ease of use and long term usability for your applications. Unlike other products designed for cable management, expandable sleeving is quick and economical to install on applications of virtually any length. In addition, the reduced weight and volume of sleeving is negligible to the overall diameter and weight of the application. The visual appeal of braided sleeving is an important factor as well. Many companies and individuals the world over use Techflex® brand braided sleeving for their wires, tubes, cords, and more. For professional applications, home installations, and even arts and crafts projects, Techflex® braided sleeving is your best solution!
Tips for Installing & Terminating Braided Sleeving
How To Determine What Diameter Sleeving You Need
Bundle the cords that you’ll be covering and measure the diameter of the bundle. If you want a snug fit, choose a braided sleeving option with a slightly smaller diameter than that of your cables. If you want a loose and flexible fit, choose a braided sleeving option with a diameter that is equal to or slightly larger than that of your cables. Keep in mind that braided sleeving loses 2% to 3% of its length when it expands. Be sure to plan accordingly!
How To Cut Metal Sleeving Without Fray
To prevent fraying when cutting any metal braid, slip the sleeving over the intended application to get an accurate measurement, wrap the area to be cut with a couple of turns of tape, mark the cut and remove the sleeving. Use shears or serrated scissors to cut through the tape and sleeving. Don’t remove the tape until the sleeving is installed and you’re ready to terminate the end.
How To Terminate Sleeving with Heatshrink Tubing
Heatshrink Tubing is the ideal way to create a tight, professional finish on any wire, hose or cable management project. Once shrunk, the tubing will hold its reduced state, even at elevated temperatures. This application can be used to protect, color code, brand, or secure ends or sections of braided sleeving. A Heat Gun is required to properly apply heatshrink tubing. You can find a guide to the proper technique for working with heatshrink tubing Here.