FIA2.00BK - FireFlex® Aero - 2" - Black - 5 ft cuts

Techflex® FireFlex® Aero

FireFlex® Aero is engineered from a dense braided fiberglass sleeve and a thick coating of self-extinguishing high temperature silicone rubber that withstands 500°F continuous exposure, and molten splash up to 2,000°F. Almost every aviation engine - turbine, turboprop or piston; civilian and military - uses FireFlex Aero to protect critical hoses and wiring in the event of an engine compartment fire. FireFlex® Aero meets the specification of AS1072, allowing qualified hose assemblies to pass the fire resistance testing specification of AS1055D. FireFlex® Aero is highly resistant to hydraulic fluids, lubricating oils, and fuels. The dense braided fiberglass interior insulates against energy loss in piping and hosing, while the high density silicone coating protects personnel from accidental injury.

OPERATING TEMPS: -65 ºF to 500 ºF (-54 ºC to 260 ºC)

MELT TEMP: 2048 ºF / 1120 ºC

COLOR OPTIONS: Black and Red

SLEEVING CATEGORY: High Temperature

RECOMMENDED CUTTING TOOL: Scissors

Why Do I Need High Temperature Sleeving?

There are many applications where high temperature braided sleeving is essential, such as in aerospace, automotive, industrial, and military settings. In these environments, wires and cables may be subjected to intense heat from engines, exhaust systems, or other high-temperature sources. Without proper insulation and protection, these components can become damaged or even fail, leading to system downtime, safety hazards, and costly repairs.

Tips for Installing & Terminating Braided Sleeving

How To Determine What Diameter Sleeving You Need

Bundle the cords that you’ll be covering and measure the diameter of the bundle. If you want a snug fit, choose a braided sleeving option with a slightly smaller diameter than that of your cables. If you want a loose and flexible fit, choose a braided sleeving option with a diameter that is equal to or slightly larger than that of your cables. Keep in mind that braided sleeving loses 2% to 3% of its length when it expands. Be sure to plan accordingly!

How To Terminate Sleeving with Heatshrink Tubing

Heatshrink Tubing is the ideal way to create a tight, professional finish on any wire, hose or cable management project. Once shrunk, the tubing will hold its reduced state, even at elevated temperatures. This application can be used to protect, color code, brand, or secure ends or sections of braided sleeving. A Heat Gun is required to properly apply heatshrink tubing. You can find a guide to the proper technique for working with heatshrink tubing Here.

About The FireFlex® Family of Braided Sleeving Products

FireFlex® products are completely non-conductive, will not melt, delaminate, become brittle or support combustion under normal conditions, and provides a professional level solution to thermal protection needs in any application.

FireFlex® - This silicone jacketed fiberglass sleeving is the choice of professionals in racing and other industries where protection from constant temperatures approaching 500°F is mandatory.

FireFlex® Aero – This sleeve is engineered from a dense braided fiberglass sleeve and a thick coating of self-extinguishing high temperature silicone rubber that withstands 500°F continuous exposure, and molten splash up to 2,000°F. FireFlex® Aero meets the specification of AS1072, allowing qualified hose assemblies to pass the fire resistance testing specification of AS1055D.

FireFlex® Snap Wrap – This wrap offers the same high temperature protection as traditional FireFlex® being constructed of silicone blanketed fiberglass. Heavy duty snaps dot the edges of Snap Wrap allowing quick and easy installation (or removal) that’s, um…well, a snap!

FireFlex® Wrap – This wrap protects and shields important hoses and cables from extreme heat and catastrophic flame outbreaks. Its unique hook and loop closure system allows for installation without the need to remove and reconnect fittings and terminations. The reusable closure additionally allows for easy repair, minimizing labor and costly downtime.

FireFlex® Flat - Fireflex® Flat provides the same protection against exposure to extreme heat, open flame, and molten splash as Fireflex® sleeve but in a versatile tape. It is specifically designed to protect components of irregular shape, such as hose splitter assemblies and cable splices. The heavy silicone coating maintains flexibility while resisting all automotive chemicals and solvents and providing an increased level of abrasion protection.

Techflex® Sleeving Categories & What They Mean

GENERAL PURPOSE: Suggested for general wire management, bundling, identification and protection applications in home, office, commercial and industrial environments.
HEAVY DUTY: Ideal for use in applications where protection from abrasion damage is a primary concern. These products are built to withstand rugged, challenging environments.
METAL & SHIELDING: Products that not only provide protection and management for wires and cables, but also offer EMI, RFI and ESD protection in a wide range of vulnerable applications.
ADVANCED ENGINEERING: Engineered from specialized polymers, designed to exacting specifications and manufactured to tight tolerances, these premium products are in use in many aerospace, military and biomedical applications.
HIGH TEMPERATURE: Designed for protection in high temperature environments where failure would be catastrophic, these products are state of the art in high temperature material engineering.
SPECIALTY: Highly engineered, application specific products to fulfill our customer's individual and unique product specifications.
ELECTRICAL: Coated fiberglass sleeving options engineered to provide a range of insulation options with up to 15,000volt protection.