114010 - Contact Removal Tool - Size 12 - Yellow

Deutsch Contact Removal Tools

Removal of contacts and connectors should be quick and painless. Too many other brands require heavy, electronic, or clumsy tools in order to remove or change pins and sockets. The Deutsch Contact Extraction Tools only require a quick and simple sliding onto the desired wire, inserting the tool into the socket until you hear it click, then pulling the tool and wire out.

Using the Deutsch Common Contact System, these removal tools fit into any appropriately sized Deutsch wires, pins, sockets, and connectors. If the size matches, than the tool matches! For those connectors in your sports car, inside your farming equipment, on a high tech aerospace jet or space ship, or for everyday automobile and household wires, these tools will allow you to work on the important leads and plugs that keep them running and in top condition.

These contact removal tools are not only tough and durable, but also a great price as well! For a small amount of money, you will be getting a tool that will withstand many uses, work on a multitude of projects, and will not cause damage or harm to existing wires or connectors. Available individually, or in a low price kit, the Deutsch Contact Extraction Tool is a must have for any installation or removal of new or old harnesses and wiring.

---

How To Use A Deutsch Contact Removal Tool

1. Select the correct extraction tool based on the contact size.
2. Snap the extraction tool on the wire you want to remove.
3. Insert the extraction tool into the connector and press until you feel it snap into place.
4. Once you feel it snap into place, you can remove the extraction tool and contact from the connector.

---

The Different Deutsch Connector Series

DT Series: Deutsch DT series environmentally sealed connectors are the best choice for transportation and racing industry. The Deutsch DT connector is commonly used with Harley Davidson, NASCAR, and many other performance racing outfitters. Know for reliability, performance, and ease of service Deutsch DT connectors use the common contact system to provide an environmentally protected connection every time. Available in 2, 3, 4, 6, 8, and 12 cavity arrangements.

DTM Series: Deutsch DTM Series of transportation connectors feature a miniature contact with an enhanced design based on the world class, field-proven Deutsch "DT" Series. The DTM is the connector to be used in harsh environmental applications where reliable signal circuits are critical to operating performance. Typical applications include on or around the engine, the transmission and under the hood. In fact, everywhere data signals or critical electronic circuits go, the field proven Deutsch design of the DTM will provide reliable peak connector performance. Available in 2, 3, 4, 6, 8, and 12 cavities

DTP Series: The answer to all of your most demanding power application requirements. DTP Series connectors offer the proven reliability and quality of Deutsch's DT Series, combined with the added flexibility of using power contacts. They are environmentally sealed and come in two and four pin arrangements. Available in-line or flange mounted and are able to handle 25 amps continuous at +120º C. Available in 2 and 4 cavity arrangments.

DTHD Series: Deutsch developed the DTHD Series for those applications requiring a complete, environmentally sealed, single power circuit termination. DTHD plugs and receptacles can be permanently assembled with thermoplastic end caps that prevent removal of the silicone wire seal grommets. Designed for diesel engine, electronic fuel injectors, automatic transmissions, ABS brakes and other applications that involve fuel and oil exposure. These end caps provide the additional reliability required for critical wiring Circuits. Available in 2, 3, 4, 6, & 12 cavity arrangements.

HD10 Series: The Deutsch HD10 Connector series are environmentally sealed connectors with a thermoplastic housing. These connectors are heavily used within the diagnostics industry. The Deutsch HD10 series offer 3 to 9 cavity arrangements and accept size 4 to 16 contacts. These are designed to provide a long service life cycle.

HDP20 Series: The Deutsch HDP20 Connector series was designed with the heavy duty on and off highway industry in mind. Whether you are working on a semi, city bus, sanitation truck, or caterpillar loader this is your connector series. The HDP20 series has a thermoplastic shell that provides a quick connect/disconnect coupling. The Deutsch contacts are inserted and removed from the rear of the connector. Available in 2, 6, 7, 8, 9, 14, 16, 18, 19, 20, 21, 23, 29, 31, 33, 35, and 47 cavity arrangements.

HD30 Series: Deutsch metal HD30 Series provides quick and easy coupling and cost effectiveness with heavy duty terminations for the truck, bus and off-highway industries. The HD30 is a heavy duty rated, environmentally sealed, and multi-pin connector that uses a bayonet coupling system to provide a vibration resistant locking mechanism. These rugged connectors with seals fabricated from tear resistant, high temperature silicone, and a rear grommet, protect the contacts from moisture, sand, dust, lubricating oils, fuel, road salt, hydraulic fluid, grease, mud and other contaminants encountered in heavy duty operations. Available in 2, 6, 7, 8, 9, 14, 16, 18, 19, 20, 21, 23, 29, 31, 33, 35, and 47 cavities

AEC Series: The AEC Series is a circular connector system designed for use in aerospace and defense applications. It features a lightweight design, with contacts rated for up to 23 amps, and is available in a 40 cavity arrangement.

DRB Series: The DRB Series is a rectangular connector system designed for use in rugged industrial applications. It features a modular design, with contacts rated for up to 13 amps, and is available in 48, 60, 102, and 120 cavity arrangements.

DRC Series: The DRC Series is a circular connector system designed for use in motorsports and other high-performance applications. It features a compact and lightweight design, with contacts rated for up to 13 amps, and is available in 24, 40, 50, 60, and 70 cavity arrangements.

DTV Series: The DTV Series is a circular connector system designed for use in the transportation industry. It features a compact and lightweight design, with contacts rated for up to 13 amps, and is available in an 18 cavity arrangement.