FMP1.50PLATE-WH - Wall Plate for Flexo® Mounting System Flange Parts - White

Flexo® Mounting System

The Flexo® Mounting System is engineered to provide a secure and attractive termination solution for interior installations of wire or cable bundles managed with Flexo® Sleeving. The unique system is simple and quick to install into a standard single gang work box without any special tools or skills, and creates a safe and attractive finished product that won't affect the flexibility of the wire bundle.

Unlike cable ties or tape, the Flexo® Mounting System doesn't attach directly to the wire bundle, and provides easy access for addition or rework of the existing wiring or cabling.The FMS system is engineered to work seamlessly with our Flexo® PET (1 1/2" & 1 3/4")and Flexo® Clean Cut fray resistant (1 1/2") expandable sleeving products.

Installing Flexo® Mounting System

Step 1: Install the sleeving over your existing wire bundle. Try to closely match the sleeving diameter to your bundle diameter so the bundle is fairly tightly managed. Leave about 2" of additional length to put through to the other side of the finished assembly.

Step 2: Open the metal retaining ring and slide it over your wire bundle.

Step 3: Install the ring INSIDE of the sleeving so that the registration teeth protrude through the sleeving.

Step 4: Take one of the locking collar halves and place it over the teeth on the retaining ring. It is important that the teeth of the retaining ring protrude into the appropriate holes in the locking collar. Hold it in place while you align the other half of the locking collar to the locking tabs on the ends of both halves.

Step 5: Squeeze the 2 halves together until both ends snap and lock together. Smooth out the sleeving to allow the wall plate to easily slide up the length of the cable bundle.

Step 6: Slide the wall plate on to the assembly so that the side that faces the wall is against the locking collar. Snap the locking collar over the registration pins on the inside of the wall plate.