Home > Automotive Motorsports > General Wire Protection Finishing > Heat Shrink Engine Label Kit > DRIFTHSL-KIT - Drift Racing Heat Shrink Engine Label Kit - 86 Labels

DRIFTHSL-KIT - Drift Racing Heat Shrink Engine Label Kit - 86 Labels

Drifthsl kit1
Drifthsl kit1
Drifthsl kit2
Drifthsl kit1Drifthsl kit2
Drifthsl kit1

Product Details

Manufacturer:

WireCare®

Manufacturer Part #:

DRIFTHSL-KIT

Unit Price: $24.99

Total Price: $24.99

Product Details

ManufacturerWireCare®
Manufacturer Part #DRIFTHSL-KIT

Product Description

WireCare® Logo

WireCare® Heatshrink Engine Label Kits

These WireCare® Exclusive pre-printed heatshrink engine label kits are a convenient solution to your wire labeling projects. These three kits (Drag Racing, Street Racing, & Drifting) are customized with pre-printed 3:1 Heatshrink Tubing to meet the labeling needs of each industry.

KIT TYPE: Drag Racing, Street Racing, & Drifting

HEATSHRINK COLOR: Yellow

PRINTING COLOR: Black Ink

Drifting Engine Label Kit Contents

  • ACC 1
  • ACC 2
  • ACC 3
  • ACC 4
  • AFR 1
  • AFR 2
  • APP1
  • APP2
  • BOOST SOL
  • BOTTLE HEAT
  • CMP1 EX
  • CMP1 IN
  • CMP2 IN
  • CMP2 EX
  • CNK POS
  • COIL 1
  • COIL 2
  • COIL 3
  • COIL 4
  • COIL 5
  • COIL 6
  • COIL 7
  • COIL 8
  • DIFF TEMP
  • E-CONT
  • ECP
  • ECT
  • EGT 1
  • EGT 2
  • EOP
  • EOT
  • FAN 1
  • FAN 2
  • FIRE SUPPRESSION
  • FP 1
  • FP 2
  • FP 3
  • FR HEIGHT
  • FR WS
  • FUEL PSI
  • FUEL TEMP
  • HELMET FAN
  • IAT 1
  • IAT 2
  • INJ 1
  • INJ 2
  • INJ 3
  • INJ 4
  • INJ 5
  • INJ 6
  • INJ 7
  • INJ 8
  • INJ 9
  • INJ 10
  • INJ 11
  • INJ 12
  • LIFT PUMP
  • MAP
  • NITROUS
  • NX ARM
  • NX PURGE
  • NX SOL
  • OIL FAN
  • TPS1
  • TPS2
  • TRANS FAN
  • TURBO RPM
  • VVTI
  • WATER PUMP
  • WG POS 1
  • WG POS 2
  • BRAKE LIGHTS (2)
  • DASH LIGHTS (2)
  • HEADLIGHTS (2)
  • INTERIOR LIGHTS (2)
  • PARK LIGHTS (2)
  • TAILLIGHTS (2)
  • KILL SW (2)
  • DRIVER KILL
  • COOL SUIT

Heat Shrink Installation Instructions

STEP ONE: Measure the Shrinkflex® shrink tubing to length and cut with a scissor. The thickness of your bundle, as well as the desired final appearance, will determine the length of the tubing you cut. Generally, a piece 1 1/2” - 2” long will accommodate almost any need. Single wires, or smaller bundles, require shorter pieces.

STEP TWO: Slip the Shrinkflex® shrink tubing over the bundle and position it so that both the sleeved and unsleeved portions are sufficiently covered. Notice the small pieces of tubing in- stalled on single wires as part of a color coding system. If your project requires multiple operations, always work up from the smallest to the largest bundle.

STEP THREE: Gently apply heat to Shrinkflex® shink tubing from a heat gun, hair dryer or torch with an appropriate attachment. Keep the heat source far enough away so that hot metal or direct flame does not come in contact with the tubing, wires or sleeving. Move the heat around the bundle to prevent damaging the sleeving and to ensure that all areas of the tubing have been shrunk. Once cooled, your installation is complete.

Technical Specifications

ColorYellow
Nominal Diameters (Fractions)1/4

Total Price: $24.99

 Top of Page

Recommended Products

Recommended Products